Energy Services - Geothermal, Wind, Energy Audits, Metering, Commissioning
 | |  | |  | |  | |  | |  | |  |
We are committed to helping our clients clean up the
environment, reduce energy consumption and decrease
carbon emissions. ALARES is an established, experienced
provider of general energy services, energy audits, feasibility
studies, Energy Conservation Measures (ECM), Sustainability
and LEED services and advanced metering design and
installation. We have extensive experience designing and
installing Geothermal systems.
The types of services we provide include:
• Turn-key design-build
• Feasibility and comparative assessments of alternatives
• Evaluation of environmentally impacted sites for
renewable energy alternatives
• Economic analyses including ROI and financial incentives
• Energy Audits
• Retro-Commissioning
• Advanced Metering Design and Installation
• Feasibility Studies including Life Cycle Cost Analysis
• Energy Modeling (eQuest)
• Geothermal Design and Installation
• Wind Studies and Turbine System Installation
Recently, Alares was awarded a GSA schedule (Contract # GS-
21F-0042X) for energy services including:
871-202 Energy Management Planning and Strategies
871-204 Metering Services
871-206 Building Commissioning Services
871-207 Energy Audit Services
871-209 Innovations in Energy
871-211 Energy Consulting Services
Alares has over 20 years experience designing and installing
energy conservation measures with specific expertise with
automatic energy control systems; HVAC systems; lighting
fixtures; and energy recovery systems. In the performance of
these services, ALARES relies on its existing resources,
including LEED and CEM certified professionals, Certified
Geothermal Designer (CGD), certified geothermal HVAC and
heat pump installers, certified retro-commissioners and other
staff with the relevant experience in the application of Energy
Conservation Measures (ECMs). Also, we can perform energy
modeling simulations using the eQUEST® /DOE2.2 program
for evaluating proposed design building energy use and
comparison with baseline ASHRAE-90.1 model.
environment, reduce energy consumption and decrease
carbon emissions. ALARES is an established, experienced
provider of general energy services, energy audits, feasibility
studies, Energy Conservation Measures (ECM), Sustainability
and LEED services and advanced metering design and
installation. We have extensive experience designing and
installing Geothermal systems.
The types of services we provide include:
• Turn-key design-build
• Feasibility and comparative assessments of alternatives
• Evaluation of environmentally impacted sites for
renewable energy alternatives
• Economic analyses including ROI and financial incentives
• Energy Audits
• Retro-Commissioning
• Advanced Metering Design and Installation
• Feasibility Studies including Life Cycle Cost Analysis
• Energy Modeling (eQuest)
• Geothermal Design and Installation
• Wind Studies and Turbine System Installation
Recently, Alares was awarded a GSA schedule (Contract # GS-
21F-0042X) for energy services including:
871-202 Energy Management Planning and Strategies
871-204 Metering Services
871-206 Building Commissioning Services
871-207 Energy Audit Services
871-209 Innovations in Energy
871-211 Energy Consulting Services
Alares has over 20 years experience designing and installing
energy conservation measures with specific expertise with
automatic energy control systems; HVAC systems; lighting
fixtures; and energy recovery systems. In the performance of
these services, ALARES relies on its existing resources,
including LEED and CEM certified professionals, Certified
Geothermal Designer (CGD), certified geothermal HVAC and
heat pump installers, certified retro-commissioners and other
staff with the relevant experience in the application of Energy
Conservation Measures (ECMs). Also, we can perform energy
modeling simulations using the eQUEST® /DOE2.2 program
for evaluating proposed design building energy use and
comparison with baseline ASHRAE-90.1 model.
Recent projects include:
• Design Build Geothermal HVAC Retrofit for 20,000 s.f. building
• Design and Installation of Advanced Metering System for General
Services Administration for Nine Federal Buildings Throughout New
England
• Renewable Energy Feasibility Studies for Department of Veterans
Affairs Campus Buildings
• Energy Audit for Manufacturing Facility
• Wind Study for Private Client
• Design of Geothermal Loopfield for Private Academy
• Design and Installation of a Energy Recovery System for a
manufacturing facility
• Design and Installation of Geothermal Test Well for the Army Corps
• Design Build Geothermal Radiant Hybrid System for a Wine Specialty
Store
• Design and Installation of Geothermal Test Well to 2,200 ft. for the
Department of Veterans Affairs
• Energy Evaluation of Private School in Connecticut
• Environmental Site Assessment for Geothermal Geo-Exchange Site
• Geothermal Feasibility Site Evaluation of a Municipal Complex
• Installation of Closed Loop Wells and Thermal Testing at IRS facility
• Installation of Closed Loop and Thermal Testing for a Private University
• Energy evaluation and design of energy conservation system for
Technical College
• Installation of 75 Well Loopfield for Navy
Geothermal Expertise
Alares has extensive experience with design and installation of Geothermal
Systems. The types of systems we have designed and installed include
closed loop, open loop and standing column well. Our staff has installed
over 100 geothermal systems. We have a certified geothermal designer
and licensed professional engineer who has designed dozens of systems.
Areas of Expertise include:
• Site Feasibility Evaluation including Geological Assessment
• Thermal Conductivity Testing
• Pump tests
• Loopfield Design (Closed Loop)
• Permitting including NEPA assessment
• Retrofit Evaluation of Existing Systems
• Loopfield Forensics
• Value Engineering
• Direct-use heating and cooling water systems
• Peer review
• Geothermal system installation with in-house staff
• Controls Design and Installation
• Design Build Geothermal HVAC Retrofit for 20,000 s.f. building
• Design and Installation of Advanced Metering System for General
Services Administration for Nine Federal Buildings Throughout New
England
• Renewable Energy Feasibility Studies for Department of Veterans
Affairs Campus Buildings
• Energy Audit for Manufacturing Facility
• Wind Study for Private Client
• Design of Geothermal Loopfield for Private Academy
• Design and Installation of a Energy Recovery System for a
manufacturing facility
• Design and Installation of Geothermal Test Well for the Army Corps
• Design Build Geothermal Radiant Hybrid System for a Wine Specialty
Store
• Design and Installation of Geothermal Test Well to 2,200 ft. for the
Department of Veterans Affairs
• Energy Evaluation of Private School in Connecticut
• Environmental Site Assessment for Geothermal Geo-Exchange Site
• Geothermal Feasibility Site Evaluation of a Municipal Complex
• Installation of Closed Loop Wells and Thermal Testing at IRS facility
• Installation of Closed Loop and Thermal Testing for a Private University
• Energy evaluation and design of energy conservation system for
Technical College
• Installation of 75 Well Loopfield for Navy
Geothermal Expertise
Alares has extensive experience with design and installation of Geothermal
Systems. The types of systems we have designed and installed include
closed loop, open loop and standing column well. Our staff has installed
over 100 geothermal systems. We have a certified geothermal designer
and licensed professional engineer who has designed dozens of systems.
Areas of Expertise include:
• Site Feasibility Evaluation including Geological Assessment
• Thermal Conductivity Testing
• Pump tests
• Loopfield Design (Closed Loop)
• Permitting including NEPA assessment
• Retrofit Evaluation of Existing Systems
• Loopfield Forensics
• Value Engineering
• Direct-use heating and cooling water systems
• Peer review
• Geothermal system installation with in-house staff
• Controls Design and Installation
